Перейти до основного матеріалу

Як визначити та виділити всі об’єднані комірки в Excel?

Автор: Техпідтримка Остання зміна: 2023-11-10

Чи знаєте ви, як знайти та виділити всі об’єднані клітинки в Excel? Ось три цікавих хитрих способи швидко визначити та вибрати всі об’єднані клітинки у виділеному або діапазоні в Excel.

doc виділити об’єднані комірки 4

Визначте та виділіть усі об’єднані комірки за допомогою команди Знайти

Швидко виділіть і підрахуйте всі об’єднані комірки за допомогою Kutools для Excel

Визначте всі об’єднані комірки з кодом VBA


Визначте та виділіть усі об’єднані комірки за допомогою команди Знайти

Ви можете ідентифікувати та виділити всі об’єднані комірки в активному аркуші за знайти команда з наступними кроками:

1. Натисніть Головна > Знайти та вибрати > знайти відкрити Знайти і замінити діалогове вікно. Ви також можете відкрити Знайти і замінити діалогове вікно з натисканням на Ctrl + F ключі.

2. Натисніть сформований у діалоговому вікні, (якщо ви не можете дізнатись сформований , натисніть кнопку Опції кнопку, щоб розгорнути діалогове вікно.) див. знімок екрана:

doc виділити об’єднані комірки 1

3. У спливаючому Знайти формат діалогове вікно, лише перевірити Об’єднати клітинки опція в Контроль тексту розділ під Вирівнювання та натисніть OK.

doc виділити об’єднані комірки 2

4. Тепер ви повертаєтесь до Знайти і замінити діалогове вікно натисніть кнопку Знайти все кнопку. Усі об’єднані комірки перераховані внизу цього діалогового вікна. Виберіть усі результати пошуку, утримуючи Shift ключ

Тепер, коли ви вибираєте всі результати пошуку, виділяються всі об’єднані комірки в активному аркуші. Дивіться знімок екрана:

doc виділити об’єднані комірки 3

Порада: Якщо ви хочете лише ідентифікувати, знайти та виділити об’єднані комірки у виділенні, спочатку потрібно вибрати діапазон.


Виберіть і підрахуйте всі об’єднані комірки за допомогою Kutools для Excel

Kutools для Excel's Виберіть об’єднані клітини інструмент допоможе вам ідентифікувати, знайти та виділити всі об’єднані комірки у виділенні лише одним клацанням миші.

Kutools для Excel : з більш ніж 300 зручними надбудовами Excel, які можна спробувати без обмежень протягом 30 днів. 

після установки Kutools для Excel, будь ласка, зробіть наступне :( Безкоштовно завантажте Kutools для Excel зараз! )

1. Виберіть діапазон даних, для якого потрібно виділити об’єднані комірки.

2. Клацання Кутулс > Select > Виберіть об’єднані клітини, див. скріншот:

3. І всі об’єднані клітинки у виділенні були виділені відразу, а також підрахована кількість об’єднаних комірок, див. Знімок екрана:

doc виділити об’єднані комірки 7

Чайові: щоб використовувати цю функцію, вам слід встановити Kutools для Excel спочатку, будь ласка натисніть, щоб завантажити та отримати 30-денну безкоштовну пробну версію зараз.

Визначте всі об’єднані комірки з кодом VBA

VBA 1: Визначте та виділіть усі об’єднані комірки

1. Утримуйте клавішу ALT + F11 і відкриває Microsoft Visual Basic для додатків вікна.

2. Клацання Insert > Модуліта вставте наступний макрос у Модулі Вікно

Sub FindMergedcells()
'updateby Extendoffice
Dim x As Range
For Each x In ActiveSheet.UsedRange
If x.MergeCells Then
x.Interior.ColorIndex = 8
End If
Next
End Sub

3, натисніть F5 ключ для запуску цього макросу. Усі об’єднані комірки в активному аркуші ідентифіковані та виділені, див. Знімок екрана:

doc виділити об’єднані комірки 4

VBA 2: Визначте та перелічіть усі об’єднані комірки

1. Утримуйте клавішу ALT + F11 і відкриває Microsoft Visual Basic для додатків вікна.

2. Клацання InsertМодуліта вставте наступний макрос у Модулі Вікно

Sub ListMergedcells()
'updateby Extendoffice
Dim x As Range
Dim sMsg As String
sMsg = ""
For Each x In ActiveSheet.UsedRange
If x.MergeCells Then
If sMsg = "" Then
sMsg = "Merged cells:" & vbCr
End If
sMsg = sMsg & Replace(x.Address, "$", "") & vbCr
End If
Next
If sMsg = "" Then
sMsg = "No merged cells."
End If
MsgBox sMsg
End Sub

3, натисніть F5 для запуску цього макросу, усі об'єднані комірки перераховані у спливаючому діалоговому вікні. Дивіться знімок екрана:

doc виділити об’єднані комірки 5

Comments (12)
No ratings yet. Be the first to rate!
This comment was minimized by the moderator on the site
Is it possible to identify the first and the last column number of the merged range in vba?
This comment was minimized by the moderator on the site
I require code to list merged ranges in a worksheet where the merged ranges are individually entered in cells starting at "A1" thus a3:c3 b2:b7 etc...........
This comment was minimized by the moderator on the site
well done You are a star... Thanks :-)
This comment was minimized by the moderator on the site
Very Nice thanks a lot
This comment was minimized by the moderator on the site
Actually I just about went mental trying to fix this in a spreadsheet. In desperation I selected all the cells (control A) clicked "merge and centre" and presto! it was fixed.
This comment was minimized by the moderator on the site
Probably obvious, but: In my last comment I should have made it clear you need to "select" each column, in turn, before scanning visually. Though really you only need to scan certain columns, I think: To the best of my knowledge, it's only cells containing text that will occasionally annex an adjoining cell, and numeric-only columns can be trusted not to do so. Even with text columns, you should be OK just checking every other column, because if any cell in the selected column has been involved in an annexation (to the right or from the left), that will show up in a visual scan of the selected column. I have never seen annexations occurring vertically, only horizontally. But if such a thing happened (a vertical annexation), you could try the same technique going row by row instead of column by column. The procedure is tedious, definitely. A royal pain, in fact. But if you have to sort your data, and Microsoft refuses to fix their bug, it's the only recourse I know of. Nowadays I try to remember to put a space character into each cell of the area I expect to use, prior to entering any other data, thus ensuring no annexations will occur.
This comment was minimized by the moderator on the site
thank u this help me to find merged cell in my excel
This comment was minimized by the moderator on the site
... so in the spreadsheet you spoke of, which was not set up with those protective space characters, my approach would be to visually scan each column which lies just to the right of any text column; and immediately after identifying & unmerging each occurrence, I would put a space character in the empty cell so the merging will not recur. Probably there's a VBA or other coding means to accomplish this much more efficiently. Anyone???
This comment was minimized by the moderator on the site
Actually I think this can be avoided entirely, if you remember to do so before entering data into any text column. In my experience the only time cells are clandestinely merged is when an empty cell is to the right of a text cell, where normally the display of the text would be extended to take advantage of the otherwise unused display space provided by the empty cell. Therefore, when initially setting up your spreadsheet, before entering any data, you can fill every "susceptible" cell with a single space—as many rows down as you expect to have data to fill. That space will be honored like any other text, and the cell to the left will not annex it.
This comment was minimized by the moderator on the site
If your spreadsheet is small (or you are desperate enough), the best way I've found is to select one column at a time and scroll all the way down to the bottom. Any merged cells will be obvious, because the entire merged cell is highlighted. You can then fix each one, one by one. But you risk wasting a lot of time doing this, since Excel continues to merge cells "behind your back" whenever it feels like doing so.* Therefore, cells you have just unmerged (or others which hadn't been merged before) may become merged while you believe you are finishing the unmerging process. I tried to find a way to completely disable the merging of cells but haven't found it. Better, of course, would be some way to keep Excel from engaging in this psychopathic behavior! *Yesterday, desperate, I did try to unmerge cells in a not-so-large spreadsheet (22 columns and fewer than 1,000 rows). Each time I thought I had finished and tried to sort, I got that same message. So then I tried another way to identify where the merged cells were—selecting a screenful of rows at a time and trying the sort on just those rows. Each time I got the message, I would try half the screenful at a time (etc.) until I identified the row(s) with merged cells. By going through the entire spreadsheet until each screenful had been successfully sorted, I figured the entire sort should work. But, NOT. Excel had been gleefully merging cells I had just unmerged. Please, someone, post a solution!
There are no comments posted here yet
Load More
Please leave your comments in English
Posting as Guest
×
Rate this post:
0   Characters
Suggested Locations