Перейти до основного матеріалу

Легке читання / перегляд великої кількості рядків і стовпців в Excel

Якщо ви працюєте на робочому аркуші, який містить величезні дані із сотнями рядків і стовпців, ви можете легко отримати головоломку під час перевірки та переходу даних від одного до іншого, що призведе до втрати часу. Щоб вирішити цю проблему, утиліта Grid Focus Kutools для Excel виділяє поперек рядка та стовпця, щоб зробити активну комірку чи діапазон видатними, як показано на знімку екрана нижче. Демонстрація

макет пострілу для читання 2


Увімкніть утиліту Grid Focus

Натисніть Кутулс > Фокус сітки щоб увімкнути цю утиліту, коли ввімкнено фокус сітки, вкладка буде виділена.
макет пострілу для читання 2


Налаштування Grid Focus

Якщо ви хочете змінити такі налаштування, як форми, стилі, кольори або прозорість, перейдіть до Налаштування фокусу сіткиs діалогове вікно для зміни.

Натисніть Кутулс та натисніть клавішу зі стрілкою поруч Фокус сітки щоб розгорнути спадне меню, потім натисніть Налаштування фокусу сітки.
макет пострілу для читання 2

У Налаштування фокусу сітки діалогове вікно, ви можете змінювати форми, стилі, кольори та прозорість, як вам потрібно, а також одночасно ви можете попередньо переглянути зміни в попередній перегляд перед застосуванням змін.
макет пострілу для читання 2

МЕНЮ Виділіть область активної комірки та Виділіть область редагування комірки Варіанти.

Tick Виділіть область активної комірки параметр, активна комірка або діапазон будуть виділені.

макет пострілу для читання 2

Зніміть Виділіть область активної комірки варіант, але поставте галочку Виділіть область редагування комірки опція, активна комірка або діапазон не буде виділено, але виділена область переповнення.

макет пострілу для читання 2

Зніміть позначку з обох Виділіть область активної комірки та Виділіть область редагування комірки параметри, як активна комірка, ні діапазон, так і область переповнення не будуть виділені.

макет пострілу для читання 2

Увімкнути фокус сітки: позначте цю опцію після налаштувань та натисніть OK, фокус сітки буде автоматично ввімкнено.

Налаштування за замовчуванням: натисніть цю кнопку, параметри Grid Focus було відновлено до налаштувань за замовчуванням Кутулс.


Примітки:

1. Ви можете скасувати цю утиліту, натиснувши Фокус сітки команда, вкладка змінюється на світло-сіру.

2. Якщо ви відкриваєте кілька файлів Excel, це Фокус сітки функція застосовується до всіх них.

3. Це Фокус сітки не буде ввімкнено автоматично при наступному запуску книги.

Демонстрація Grid Focus


Kutools для Excel: понад 300 зручних інструментів у вас під рукою! Почніть 30-денну безкоштовну пробну версію без обмежень функцій сьогодні. Завантажити зараз!

    Рекомендовані інструменти продуктивності
    Наведені нижче інструменти можуть значно заощадити ваш час та гроші, який із них підходить саме вам?
    Вкладка Office: Використання зручних вкладок у вашому офісі, як спосіб Chrome, Firefox та New Internet Explorer.
    Kutools для Excel: Більше 300 розширених функцій для Excel 2021, 2019, 2016, 2013, 2010, 2007 та Office 365.

    Kutools для Excel

    Описана вище функція є лише однією з 300 потужних функцій Kutools для Excel.

    Створено для Excel(Office) 2021, 2019, 2016, 2013, 2010, 2007 та Office 365. Безкоштовне завантаження та використання протягом 30 днів.

    Знімок екрана Kutools для Excel

    btn читати далі      btn завантажити     btn покупка

Comments (17)
No ratings yet. Be the first to rate!
This comment was minimized by the moderator on the site
Why doesn't it open automatically at startup? it would be nice to remember the last setting
This comment was minimized by the moderator on the site
Hello, Mennan,
Sorry for the inconvenience, for the stability of the function, our feature is disabled when opening next time at present, but the last setting and operation can be remembered.
Thanks for your comment.
This comment was minimized by the moderator on the site
I have a problem with the reading layout. Every time when I start it, it behaves strangely. It "chose" a smaller size of the sheet than it is actually on my screen and it works in that sheet. Eg: if I see on my screen columns range from A up to AC and rows range from 1 up to 39, the reading layout chooses that my columns range from A up to half of X and rows range from 1 up to half of 32 and works in that let's call it window.
I tried to uninstall kutools and install it again, but the same problem remains.
Any wise advice would be appreciated from my side.
I am running MS office professional plus 2021.

Thanks in advance
This comment was minimized by the moderator on the site
I might detected the problem. I am running 3 displays, one from a laptop 15,6" and two others 24" over wavlink dock. All three displays are running at a resolution of 1920 x 1080. My main display is from the laptop.
I am using excel on another two 24" displays just because they have a bigger screen. When I put excel on the laptop window reading layout behaves as it should, and that is the exact size of the sheet that I previously described as a smaller window.
This comment was minimized by the moderator on the site
Hello, Dejan,
Thanks for your comment.
I have fed back this problem to the developers, if there is a an upgrade or fixed, we will let you know in the first time.
This comment was minimized by the moderator on the site
If you make this auto load when opening excel I will buy this product. :D
This comment was minimized by the moderator on the site
Hi, Andrei

Thanks for your comment, your suggestion has been fed back to the developers, if there's an upgrade, I'll let you know in the first time. 😄
This comment was minimized by the moderator on the site
Very Good Service Nice blog
This comment was minimized by the moderator on the site
Hello, Thanks for sharing this informative blog with us.
This comment was minimized by the moderator on the site
This feature is great. Bear in mind I had an existing Excel file where this button was ALWAYS disabled. I had to copy-and-paste the data out of the file and save it into a new file to get the "Reading Layout" button to enable. It then worked fine.
This comment was minimized by the moderator on the site
Hello,

Please try to update to the latest version. We have enhanced it.🙂
This comment was minimized by the moderator on the site
se eu compra a licença consigo instalar mais de uma vez no pc ou só serve uma vez ?
This comment was minimized by the moderator on the site
This solved one of my biggest headaches. I have one program that outputs a report that when exported to Excell it creates 200 worksheets! I have never been able to use it until now. Merging all of them into one worksheet only takes a few minutes with Kutools.
This comment was minimized by the moderator on the site
Thanks A lot of this product, mainly its use for reading layout & shortcuts of left side menu
This comment was minimized by the moderator on the site
My OS: Windows 7 Pro fully updated My Excel: 2010 My sheet: Range R1C6:R504C6 is in use PROBLEM: READING LAYOUT FAILS TO FILL ROW AND COLUMN SELECTED 1. Magnification: 60% 2. Rows 313-355 show 3. Cell R354:C6 selected 4. Column 5 fills to row 323. Row 354 no fill 5. Mag to 50% 6. Rows 311-357 show 7. Column 5 fills top to bottom. Row 354 fills left to right 8. Mag to 60%. Goto 4. 9. Mag to 70%. 10. Rows 319-354 show 11. Column 6 fills to row 325. Row 354 is empty. 12. Click R354:C6 13. No change! 14. WHY? NOTE: At 60% magnification selecting any cell on visible sheet on rows greater than 323 demonstrates same problem. Selecting row 323 or lower i.e R320 the function works as expected with row and column selected but only to row 323!
This comment was minimized by the moderator on the site
Hello,

Please try to update to the latest version. We have enhanced it.
There are no comments posted here yet
Load More
Please leave your comments in English
Posting as Guest
×
Rate this post:
0   Characters
Suggested Locations