Перейти до основного матеріалу

Як запобігти тому, щоб Outlook щоразу запитував обмін обліковими даними?

Вас запитували облікові дані для обміну під час відкриття Microsoft Outlook? Якщо так, ви можете помітити, що під час кожного запуску Outlook діалогове вікно безпеки Windows з’являється. Дивіться знімок екрана нижче. Зазвичай ви можете вирішити цю проблему, перевіривши Запам’ятай мої посвідчення після введення облікових даних та клацніть на OK кнопки.

Однак у деяких особливих випадках він кожного разу при запуску Microsoft Outlook запитує облікові дані для обміну, але немає можливості Запам’ятай мої облікові дані взагалі в спливаючому діалоговому вікні безпеки Windows. (Див. Наступний знімок екрана.) У цій статті я допоможу вам вирішити цю проблему та запобігти тому, щоб Microsoft Outlook швидко запитував облікові дані з налаштуванням параметрів облікового запису.

Вкладка Office - увімкніть редагування та перегляд із вкладками в Microsoft Office, що полегшить роботу
Kutools для Outlook - покращте Outlook за допомогою 100+ розширених функцій для надзвичайної ефективності
Покращіть свій Outlook 2021 - 2010 або Outlook 365 за допомогою цих розширених функцій. Насолоджуйтесь повною 60-денною безкоштовною пробною версією та покращте роботу електронної пошти!

Щоб Microsoft Outlook не запитував облікові дані кожного разу під час запуску, потрібно змінити деякі параметри обміну в налаштуваннях облікового запису. Будь ласка, виконайте наступні дії:

Крок 1: Відкрийте діалогове вікно Параметри облікового запису:

  1. У програмі Outlook 2007 натисніть кнопку Tools > Налаштування облікового запису;
  2. У програмах Outlook 2010 та 2013 натисніть кнопку філе > інформація > Налаштування облікового запису > Налаштування облікового запису.

Крок 2: У діалоговому вікні Налаштування облікового запису

  1. Перейти до E-mail вкладка;
  2. Клацніть, щоб виділити обліковий запис Exchange, який запитує облікові дані для входу кожного разу при відкритті Microsoft Outlook;
  3. Натисніть Редагувати кнопки.

Крок 3: У новому діалоговому вікні Змінити обліковий запис натисніть кнопку Додаткові налаштування кнопки.

Крок 4: У спливаючому діалоговому вікні Microsoft Exchange

  1. Перейти до Безпека вкладка;
  2. Зніміть прапорець Завжди запитувати облікові дані для входу;
  3. Натисніть OK кнопки.

Крок 5: Тепер ви повертаєтесь до діалогового вікна Змінити обліковий запис, клацніть на МАЙБУТНІ кнопки і обробка кнопку послідовно.

Крок 6: натисніть кнопку близько , щоб вийти з діалогового вікна Параметри облікового запису.

Після налаштування параметрів безпеки зазначеного облікового запису обміну воно більше не з’являється у діалоговому вікні та запиті облікових даних при відкритті Microsoft Outlook.


Найкращі інструменти продуктивності офісу

Kutools для Outlook - Понад 100 потужних функцій, які покращать ваш Outlook

🤖 AI Mail Assistant: Миттєві професійні електронні листи з магією штучного інтелекту – геніальні відповіді одним клацанням, ідеальний тон, багатомовна майстерність. Трансформуйте електронну пошту без зусиль! ...

???? Автоматизація електронної пошти: Поза офісом (доступно для POP та IMAP)  /  Розклад надсилання електронних листів  /  Автоматична копія/прихована копія за правилами під час надсилання електронної пошти  /  Автоматичне пересилання (розширені правила)   /  Автоматично додавати привітання   /  Автоматично розділяйте електронні листи кількох одержувачів на окремі повідомлення ...

📨 Управління електронною поштою: Легко відкликайте електронні листи  /  Блокуйте шахрайські електронні листи за темами та іншими  /  Видалити повторювані електронні листи  /  розширений пошук  /  Консолідація папок ...

📁 Вкладення ProПакетне збереження  /  Пакетне від'єднання  /  Пакетний компрес  /  Автозавантаження   /  Автоматичне від'єднання  /  Автокомпресія ...

???? Магія інтерфейсу: 😊Більше красивих і класних смайликів   /  Підвищте продуктивність Outlook за допомогою вкладок  /  Згорніть Outlook замість того, щоб закривати ...

👍 Дива в один клік: Відповісти всім із вхідними вкладеннями  /   Антифішингові електронні листи  /  🕘Показувати часовий пояс відправника ...

👩🏼‍🤝‍👩🏻 Контакти та календар: Пакетне додавання контактів із вибраних електронних листів  /  Розділіть групу контактів на окремі групи  /  Видаліть нагадування про день народження ...

більше Особливості 100 Чекайте на ваше дослідження! Натисніть тут, щоб дізнатися більше.

 

 

Comments (41)
No ratings yet. Be the first to rate!
This comment was minimized by the moderator on the site
For non-experienced user

Close down outlook completely

1
Control Panel > (view by icons, not categories) > mail > Show Profiles > Add > (call it whatever you like) > change the dropdown to the new one you just created
This will recreate the profile settings and you will need to re-add your mailboxes

2
C:\users\(you username)\appdata(this is hidden so make sure you can see hidden files - google guides available for this)local\microsoft\outlook
eg
C:\users\BEN\appdata\local\microsoft\outlook
This file, rename it to "Outlookold"
(this backs up the file so we can get it back by changing the name back to "Outlook" if need be - if the fix works, delete this to save yourself some space after you're done)



3
NOW, this is the first time you should be trying to open outlook - it will take a while but should load up after recreating the configuration folder and the configuring your account - then just re-add your mailbox(es).




For experienced users
*insert disclaimer about being careful with RegEdit*

reg delete "\\%asset%\HKEY_USERS\%SID%\Software\Microsoft\Office\16.0\Outlook\Profiles\Outlook"



For super users

*insert disclaimer about being careful with RegEdit*
HKEY_CURRENT_USER\Software\Microsoft\Office\16.0\Outlook\Profiles
locate the mail profile that's active
go to 9375CFF0413111d3b88a00104b2a6676
Find which one has the affected mailbox in "Account Name"
Note the "Service UID" - go to the binary value in the "Profile" key that we're in
in here, find the REG_BINARY for "01023d0d" and make a note of the binary - go to the binary value in the "Profile" key that we're in
Right Click > New > Binary Value

Name = 00036619
Value = 01 f0 00 80
This comment was minimized by the moderator on the site
my box is NOT checked. This is not the solution.
This comment was minimized by the moderator on the site
My laptop running Windows 8.1 and using MS Outlook 2013 has all those setting correct ie as you described them but still I getting this annoying Windows Security popup that requires me to enter password everytime I start MS Outlook. What could be another problem for this occurence.
This comment was minimized by the moderator on the site
M$ is a sack of poo. I can't believe nobody has come up with a professional mail, calendar and contacts package to rival this sack of horse sh*t. The button was already unchecked so this did not help with a recurring problem.
This comment was minimized by the moderator on the site
To me was necessary one step more:
Change the option "logon network security" to "password authentication" instead "negotiate authentication" on Exchange settings window.
This comment was minimized by the moderator on the site
How to access outlook if I forgot my credentials (Windows Security)?
This comment was minimized by the moderator on the site
Hayley... so you ticked it and THAT solved the problem, really? That doesn't make sense.
This comment was minimized by the moderator on the site
The option to click on or off to always prompt for logon credentials is grayed out and I can't select it.
This comment was minimized by the moderator on the site
so , I went in and my ' always prompt ' was also not ticked. I ticked it and it has fixed the problem.
This comment was minimized by the moderator on the site
I worked through all of these steps above, but got to the last step and the box "Always prompt for logon credentials" was already unchecked. The problem is still there.
This comment was minimized by the moderator on the site
I have the same problem.

Did you ever get yours fixed. IF so what did you do?
This comment was minimized by the moderator on the site
You need to go to Control Panel > Users > Manage Your Credentials (link on the left hand side of Windows 10 Explorer) > Windows Credentials > :

Under Generic credentials, look for "MS.Outook.15:[YOUR ACCOUNT NAME]". If there are two entries for the same account, delete the one which ends in "PUT". This should fix your problem. The problem arises where two or more entries/keys exist and Outlook does not know which one to use, so it requests on start-up of the program.



Before doing so however, I would advise you to back up your credentials.
This comment was minimized by the moderator on the site
Thanks Stu, that worked perfectly for me... although I didn't have a "PUT" entry, just 2 entries for the same account.... deleted them both and at next Outlook restart entered the correct credentials, ticked the "remember" box and worked fine ever since. Problem occurred because my exchange account had been deleted and then re-created with same e-mail and new password.
This comment was minimized by the moderator on the site
Allan, mine happened the same way! Although I was weary about deleting anything so I just updated the credentials to the new passwords and all is well in La La land!
This comment was minimized by the moderator on the site
Encountered a similar situation with an academic email account. The same password was being used according to Windows credentials, although the automatically assigned username was supposed to be "blank" according to the Windows credentials. I logged in first using the automatic username (which I could not edit without changing the account). The prompt re-appeared immediately after, although with the option to change the username. I left the username blank and entered only the password to sign in. I haven't experienced any more prompts. Thank-you for the tip!
There are no comments posted here yet
Load More
Please leave your comments in English
Posting as Guest
×
Rate this post:
0   Characters
Suggested Locations