Перейти до основного матеріалу

Як заблокувати або захистити комірки після введення чи введення даних у Excel?

Припустимо, у вас є робочий аркуш і лише певний діапазон порожніх комірок потребує введення даних, а після закінчення введення даних вам потрібно автоматично заблокувати комірки, щоб не допустити змін знову. Як ви можете досягти цього? Ця стаття може вам допомогти.

Заблокуйте або захистіть комірки після введення даних або введення за допомогою коду VBA


Заблокуйте або захистіть комірки після введення даних або введення за допомогою коду VBA

Наприклад, певним діапазоном порожніх комірок є A1: F8. Будь ласка, виконайте наступні дії, щоб заблокувати ці комірки після введення даних у Excel.

1. Спочатку розблокуйте цей діапазон, виберіть клітинки та клацніть правою кнопкою миші, а потім виберіть Формат ячеек в меню, що клацне правою кнопкою миші, і в Формат ячеек діалогове вікно, знявши прапорець біля Заблокований коробка під захист і нарешті клацніть на OK кнопку. Дивіться знімок екрана:

2. клацання Розгляд > Захистити аркуш. І вкажіть пароль для захисту цього аркуша.

3. Клацніть правою кнопкою миші вкладку аркуша, виберіть Переглянути код з меню, що клацне правою кнопкою миші. Потім скопіюйте та вставте наведений нижче код VBA у вікно коду. Дивіться знімок екрана:

Код VBA: блокування або захист комірок після введення або введення даних

Dim mRg As Range
Dim mStr As String

Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean)
If Not Intersect(Range("A1:F8"), Target) Is Nothing Then
    Set mRg = Target.Item(1)
    mStr = mRg.Value
End If
End Sub
Private Sub Worksheet_Change(ByVal Target As Range)
    Dim xRg As Range
    On Error Resume Next
    Set xRg = Intersect(Range("A1:F8"), Target)
    If xRg Is Nothing Then Exit Sub
    Target.Worksheet.Unprotect Password:="123"
    If xRg.Value <> mStr Then xRg.Locked = True
    Target.Worksheet.Protect Password:="123" 
End Sub
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Not Intersect(Range("A1:F8"), Target) Is Nothing Then
    Set mRg = Target.Item(1)
     mStr = mRg.Value
End If
End Sub

примітки: У коді "A1: F8" - діапазон, необхідний для введення даних; а "123" - це пароль цього захищеного робочого аркуша. Будь ласка, змініть їх, як вам потрібно.

4. прес інший + Q клавіші одночасно, щоб закрити Microsoft Visual Basic для додатків вікна.

Після завершення введення даних до комірок діапазону A1: F8 вони будуть автоматично заблоковані. І ви отримаєте відповідне діалогове вікно, якщо спробуєте змінити будь-який вміст комірки цього діапазону. Дивіться знімок екрана:


Статті по темі:

Найкращі інструменти продуктивності офісу

🤖 Kutools AI Aide: Революціонізуйте аналіз даних на основі: Інтелектуальне виконання   |  Згенерувати код  |  Створення спеціальних формул  |  Аналізуйте дані та створюйте діаграми  |  Викликати функції Kutools...
Популярні функції: Знайдіть, виділіть або визначте дублікати   |  Видалити порожні рядки   |  Об’єднайте стовпці або клітинки без втрати даних   |   Раунд без Формули ...
Супер пошук: VLookup за кількома критеріями    Багатозначний VLookup  |   VLookup на кількох аркушах   |   Нечіткий пошук ....
Розширений розкривний список: Швидке створення випадаючого списку   |  Залежний спадний список   |  Виберіть розкривний список, що вибирається ....
Менеджер колонок: Додайте конкретну кількість стовпців  |  Перемістити стовпці  |  Перемкнути статус видимості прихованих стовпців  |  Порівняйте діапазони та стовпці ...
Особливості: Фокус сітки   |  Перегляд дизайну   |   Велика панель формул    Диспетчер робочих книг і аркушів   |  Бібліотека ресурсів (автотекст)   |  Вибір дати   |  Об’єднайте робочі аркуші   |  Шифрування/розшифрування клітинок    Надсилайте листи за списком   |  Супер фільтр   |   Спеціальний фільтр (фільтр жирний/курсив/закреслений...) ...
Топ-15 наборів інструментів12 текст Tools (додати текст, Видалити символи, ...)   |   50 + Графік типи (діаграма Ганта, ...)   |   40+ Практичний Формули (Розрахуйте вік на основі дня народження, ...)   |   19 вставка Tools (Вставте QR-код, Вставити зображення зі шляху, ...)   |   12 Перетворення Tools (Числа до слів, Валютна конверсія, ...)   |   7 Злиття та розділення Tools (Розширені комбіновані ряди, Розділені клітини, ...)   |   ... і більше

Покращуйте свої навички Excel за допомогою Kutools для Excel і відчуйте ефективність, як ніколи раніше. Kutools для Excel пропонує понад 300 додаткових функцій для підвищення продуктивності та економії часу.  Натисніть тут, щоб отримати функцію, яка вам найбільше потрібна...

Опис


Вкладка Office Передає інтерфейс із вкладками в Office і значно полегшує вашу роботу

  • Увімкніть редагування та читання на вкладках у Word, Excel, PowerPoint, Publisher, Access, Visio та Project.
  • Відкривайте та створюйте кілька документів на нових вкладках того самого вікна, а не в нових вікнах.
  • Збільшує вашу продуктивність на 50% та зменшує сотні клацань миші для вас щодня!
Comments (75)
Rated 5 out of 5 · 1 ratings
This comment was minimized by the moderator on the site
Good day, what I want to do is quite similar to the presented code however, the code only caters for individual data entry. My case is that I have a data entry interface but the given code doesn't follow the formulas before the selected cells which is substantial in my situation. Please, help me to resolve this. Thank you so much :D
This comment was minimized by the moderator on the site
I want to lock a particular range after an entry and allow only one entry in that range.
the range already contains a data validation.
This comment was minimized by the moderator on the site
Hi Rakesh Chand,
Assuming the specific range is A1:D7, when you select an entry in any data validation of that range, the worksheet will be protected.
Please apply the following VBA code to get it done.

Private Sub Worksheet_Change(ByVal Target As Range)
'Updated by Extendoffice 20220831
    Dim xRg As Range
    Dim Rg As Range
    On Error Resume Next
    Set Rg = Range("A1:D7")
    Set xRg = Intersect(Rg, Target)
    If xRg Is Nothing Then Exit Sub
       
    Rg.Locked = True
    
        Rg.Worksheet.Protect Password:="123"
    
End Sub
This comment was minimized by the moderator on the site
доброго времени суток!
Возможно ли с помощью кода сделать следующие?
Есть таблица, к примеру 6 столбцов, в которую последовательно вносят данные в 5 столбов (присутствует режим "выбор из списка данных" и формулы), а в 6-ом выбирается фамилия вносившего. Возможно ли блокировать полностью строку с внесенными данными, только после заполнения последней ячейке в этой строке (6-ой столбец)?
Выше указанный способ блокирует ввод данных в ячейки где есть выбор из списка данных на всём листе.
Если есть такой вариант, буду очень признателен за код.
Заранее Спасибо!
Rated 5 out of 5
This comment was minimized by the moderator on the site
Hi I am having an error with the deletion. Whenever I tried to click the delete the record a pop up will say "Microsoft Excel will permanently delete this sheet. Do you want to continue'.

Here's the code that I am using:

Sub Deletion()

Dim iRow As Long
Dim iSerial As Long


iSerial = Application.InputBox("Please enter Serial No. to delete the record.", "Delete", , , , , , 1)

On Error Resume Next

iRow = Application.WorksheetFunction.IfError _
(Application.WorksheetFunction.Match(iSerial, Sheets("Database").Range("A:A"), 0), 0)

On Error GoTo 0

If iRow = 0 Then

MsgBox "No record found.", vbOKOnly + vbCritical, "No Record"
Exit Sub

End If

Sheets("Database").Cells(iRow, 1).EntireRow.Delete Shift:=xlUp

End Sub


Please help me fix it. Thanks!
This comment was minimized by the moderator on the site
Hi guys. I need help and I'm new with VBA.
Say, I have Column BH with dropdown choices for Confirmed, Pending, and Cancelled.
All columns must remain unlocked for editing except for Columns A, BD, BE, and BF which must remain lock all the time.
If "Confirmed" is selected on Column BH, I want to lock the entire row before/next to it. Then, a password must be used if I want to edit the "Confirmed" row.
Can someone help me with this please?
Thanks in advance.

This comment was minimized by the moderator on the site
Good day...
Your tutorial is great!
I ran across a Run-Time error '13': during selection change if I select entire row. What is the turn-around for this? Any insight is much appreciated.
This comment was minimized by the moderator on the site
Hi,Which Excel version are you using?
This comment was minimized by the moderator on the site
Hi, This is all new to me. The formula is great. I want to lock cells D6:D36, H6:H35 & L6:L35 but can't get this to work. any help would be greatly appreciated.
This comment was minimized by the moderator on the site
Hi simon,If you want to lock cells in D6:D36, H6:H35 and L6:L35 separately after finish entering data in each range. Please do as follows.1. Select these three ranges by holding the Ctrl key;2. Do as the post described in step 1 to unlock these three ranges;3. Protect your worksheet with a password (Here my password is 123. This password will be used in the below code);4. Right click the sheet tab and then paste the below VBA code into the Code editor, and then press Alt + Q keys to close the Microsoft Visual Basic for Applications window.Notes: 1) In the code, you can change the ranges and password as you need;2)After pressing Alt + Q keys to close the code window, you need to shift to another worksheet and then go back to current sheet to make the code work. Otherwise, error will be occurred.<div data-tag="code">Dim mRg As Range
'Updated by Extendoffice 20201030
Dim mStr As String
Dim mStrAddress As String
Dim mArr
Private Sub Worksheet_Activate()
On Error Resume Next
Erase mArr()
mStrAddress = "D6:D36,H6:H35,L6:L35"
mArr = Split(mStrAddress, ",")
End Sub

Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean)
Dim xI As Integer
For xI = 0 To UBound(mArr)
If Not Intersect(Range(mArr(xI)), Target) Is Nothing Then
Set mRg = Target.Item(1)
mStr = mRg.Value
Exit For
End If
Next
End Sub
Private Sub Worksheet_Change(ByVal Target As Range)
Dim xRg As Range
Dim xI As Integer
On Error Resume Next
For xI = 0 To UBound(mArr)
Set xRg = Null
Set xRg = Intersect(Range(mArr(xI)), Target)
If Not (xRg Is Nothing) Then
Target.Worksheet.Unprotect Password:="123"
If xRg.Value <> mStr Then xRg.Locked = True
Target.Worksheet.Protect Password:="123"

End If
Next
End Sub
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim xI As Integer
On Error Resume Next
For xI = 0 To UBound(mArr)
If Not Intersect(Range(mArr(xI)), Target) Is Nothing Then
Set mRg = Target.Item(1)
mStr = mRg.Value
End If
Next
End Sub
This comment was minimized by the moderator on the site
If Not Intersect(Range("CUSTOMER!"), Target) Is Nothing Then
I got an error. I want to protect the whole sheet
This comment was minimized by the moderator on the site
Good afternoon ... thank you again for this great resource. I do have one question. We have a shared document that is used by multiple users for input purposes. We have noticed that if User A enters data in a given cell, User A cannot edit per the code above (which is exactly what we want) but User B who the document is also shared with can delete the data that User A entered. Is there a revision for the code above that could be included in a shared document that has multiple users that are entering data.
This comment was minimized by the moderator on the site
Hi
I want to auto lock cell while i'm saving my worksheet
Can you help me how to do this in vba
There are no comments posted here yet
Load More
Please leave your comments in English
Posting as Guest
×
Rate this post:
0   Characters
Suggested Locations