Перейти до основного матеріалу

Як однозначно ранжувати номери діапазону без дублікатів в Excel?

У Microsoft Excel функція звичайного рангу надає повторюваним числам однаковий ранг. Наприклад, якщо число 100 з’являється двічі у вибраному діапазоні, і перше число 100 приймає ранг 1, останнє число 100 також приймає ранг 1, і це пропускає деякі цифри. Але іноді вам потрібно класифікувати ці значення однозначно, як показано на наступних скріншотах. Щоб отримати докладнішу інформацію про унікальний рейтинг, будь ласка, виконайте наступний посібник, показаний поетапно.

Ранжувати номери діапазону однозначно в порядку зменшення

Ранжувати номери діапазону однозначно за зростанням


Ранжувати номери діапазону однозначно в порядку зменшення

У цьому розділі ми покажемо вам, як однозначно ранжувати номери діапазону за спаданням.

Візьмемо для прикладу дані, наведені нижче, на екрані, ви можете побачити, що серед діапазону A2: A11 є кілька повторюваних чисел.

1. Виберіть B2, скопіюйте та вставте формулу =RANK(A2,$A$2:$A$11,0)+COUNTIF($A$2:A2,A2)-1 в Бар Формула, потім натисніть Що натомість? Створіть віртуальну версію себе у ключ. Дивіться знімок екрана:

2. Потім номер ранжування відображається в комірці B2. Виділіть клітинку B2 і поставте курсор у нижній правий кут, коли з’явиться маленький чорний хрестик, перетягніть його вниз до комірки B11. Тоді унікальний рейтинг вдалий. Дивіться знімок екрана:


Ранжувати номери діапазону однозначно за зростанням

Якщо ви хочете однозначно ранжувати номери діапазону за зростанням, виконайте наступні дії.

1. Виділіть комірку B2, скопіюйте та вставте формулу =RANK(A2,$A$2:$A$11,1)+COUNTIF($A$2:A2,A2)-1 в Бар Формула, потім натисніть Що натомість? Створіть віртуальну версію себе у ключ. Потім перший номер ранжування відображається в комірці B2.

2. Виділіть клітинку B2, перетягніть маркер заповнення вниз до комірки B11, після чого завершиться унікальне ранжування.

Найкращі інструменти продуктивності офісу

🤖 Kutools AI Aide: Революціонізуйте аналіз даних на основі: Інтелектуальне виконання   |  Згенерувати код  |  Створення спеціальних формул  |  Аналізуйте дані та створюйте діаграми  |  Викликати функції Kutools...
Популярні функції: Знайдіть, виділіть або визначте дублікати   |  Видалити порожні рядки   |  Об’єднайте стовпці або клітинки без втрати даних   |   Раунд без Формули ...
Супер пошук: VLookup за кількома критеріями    Багатозначний VLookup  |   VLookup на кількох аркушах   |   Нечіткий пошук ....
Розширений розкривний список: Швидке створення випадаючого списку   |  Залежний спадний список   |  Виберіть розкривний список, що вибирається ....
Менеджер колонок: Додайте конкретну кількість стовпців  |  Перемістити стовпці  |  Перемкнути статус видимості прихованих стовпців  |  Порівняйте діапазони та стовпці ...
Особливості: Фокус сітки   |  Перегляд дизайну   |   Велика панель формул    Диспетчер робочих книг і аркушів   |  Бібліотека ресурсів (автотекст)   |  Вибір дати   |  Об’єднайте робочі аркуші   |  Шифрування/розшифрування клітинок    Надсилайте листи за списком   |  Супер фільтр   |   Спеціальний фільтр (фільтр жирний/курсив/закреслений...) ...
Топ-15 наборів інструментів12 текст Tools (додати текст, Видалити символи, ...)   |   50 + Графік типи (діаграма Ганта, ...)   |   40+ Практичний Формули (Розрахуйте вік на основі дня народження, ...)   |   19 вставка Tools (Вставте QR-код, Вставити зображення зі шляху, ...)   |   12 Перетворення Tools (Числа до слів, Валютна конверсія, ...)   |   7 Злиття та розділення Tools (Розширені комбіновані ряди, Розділені клітини, ...)   |   ... і більше

Покращуйте свої навички Excel за допомогою Kutools для Excel і відчуйте ефективність, як ніколи раніше. Kutools для Excel пропонує понад 300 додаткових функцій для підвищення продуктивності та економії часу.  Натисніть тут, щоб отримати функцію, яка вам найбільше потрібна...

Опис


Вкладка Office Передає інтерфейс із вкладками в Office і значно полегшує вашу роботу

  • Увімкніть редагування та читання на вкладках у Word, Excel, PowerPoint, Publisher, Access, Visio та Project.
  • Відкривайте та створюйте кілька документів на нових вкладках того самого вікна, а не в нових вікнах.
  • Збільшує вашу продуктивність на 50% та зменшує сотні клацань миші для вас щодня!
Comments (27)
No ratings yet. Be the first to rate!
This comment was minimized by the moderator on the site
Hi every one, i have this formula
=RIJEN($H$2:$H$7)-SOMPRODUCT(--(H2-E2/10000>$H$2:$H$7-$E$2:$E$7/10000))

it determines the rank of a value in a column. if there is an equal value, the rank is determined by a 2nd value in another column. Now the problem is when negative numbers occur in the 2nd column, the rank is determined inversely -1 gets a lower rank than 0

can anyone adjust this formula or create a new one for excel 2007 dutch version
This comment was minimized by the moderator on the site
Hi every one, i have this formula
=RIJEN($H$2:$H$7)-SOMPRODUCT(--(H2-E2/10000>$H$2:$H$7-$E$2:$E$7/10000))

it determines the rank of a value in a column. if there is an equal value, the rank is determined by a 2nd value in another column. Now the problem is when negative numbers occur in the 2nd column, the rank is determined inversely -1 gets a lower rank than 0

can anyone adjust this formula or create a new one for excel 2007 dutch version

thanks
This comment was minimized by the moderator on the site
Hey so I just worked on this formula for the past 45 minutes. The above formula is wrong, the output does provide duplicates but that is only because the countif range is not accounting for the entire range.

Above the descending formula is: =RANK(A2,$A$2:$A$11,0)+COUNTIF($A$2:A2,A2)-1

The bold/underlined A2 cell should be equal to the ending of the range which is A11. Which would make correct forumla stance:

=round(RANK(A2,$A$2:$A$11,0)+COUNTIF($A$2:A7,A2)-1

For visuals, on my sheet I created a leader tracking board with the following formula and I got no duplicates see below 2 images with duplicate numbers but different ranking levels:


My Descending formula: =round(RANK(D7,$D$7:$BY$7)+countif($D$7:$BY$7,D7)-1)
Key Notes:
- My range is locked
- D7 is the start of my range and BY7 is the end of my range
- I have added the round formula to account for any decimals
- the (-1) will automatically subtract from the previous ranking.
This comment was minimized by the moderator on the site
Hi Zoe,
Thank you for your feedback. I will check the formula and make the changes.
This comment was minimized by the moderator on the site
It's very helpful content. Thank You so much.
This comment was minimized by the moderator on the site
Thank you for the solution! Works perfectly!
This comment was minimized by the moderator on the site
This tip was PERFECT in solving my sorting issue! Thanks very much!!!
This comment was minimized by the moderator on the site
I still have duplicate rankings. Before I used COUNTIF the rankings were 4 for both, now they are both ranked 5 with COUNTIF BUT in my chart, it will only list one of the items twice instead of listing both items. Here is my formula: =RANK(V3,V$3:V$30, 1)+COUNTIF(V$3:V$30:V3,V3)-1
In the ranking chart it displays rank 4 as team 1 and rank 5 as team 1 since team 1 and team 2 have the same rank, team 2 is not listed. Here is the formula for those cells:=INDEX($L$3:$L$30,MATCH(SMALL($V$3:$V$30,Y3),$V$3:$V$30,0))
How do I make sure teams that are tied do not get left off list?


This comment was minimized by the moderator on the site
Formulas for unique ascending and descending are identical. Ascending should be: =RANK(A2,$A$2:$A$11,1)+COUNTIF(A2:$A$2,A2)-1.
This comment was minimized by the moderator on the site
if you see the below ranking, where the duplicate numbers found, number is missing.
Exmples
After 23 it goes to 25, after 29 it goes to 30, Formula miss the next number like - 24 & 29

Score Rank

4661 21

4650 22

4648 23

4645 25

4645 25

4644 26

4629 27

4626 28

4595 30

4595 30

4578 31

4438 32
This comment was minimized by the moderator on the site
What's the formula for this ranking where it combines same values into one ranking???
This comment was minimized by the moderator on the site
Hi, This formula just ranks all numbers in ascending/descending order and doesn't combine the duplicates into one rank. How do I combine the ranking for duplicates, for example two duplicate 100s to be combined and both ranked as 1, 3 duplicate 90s to be combined and ranked as 2, 2 duplicate 80s ranked as 3, etc.? In your example of total 10 students I want a formula that will rank the two 100s as 1, rank the two 90s as 2, rank the two 80s as 3, etc. Please help. Thanks
This comment was minimized by the moderator on the site
if you do want this kind of ranking, what I would do is copy the whole list somewhere else, then use remove duplicates in the Data menu to leave only the individual values. rank these individual scores using a standard RANK formula and then use a simple VLOOKUP formula to return the value against the score in the full list.

this will show the values the way you want above.
This comment was minimized by the moderator on the site
Why do you need to do this? a standard RANK formula will rank these examples as 1, 1, 3, 3, 5, 5. this is a much more usual way of ranking as if there are 2 first places the next in line would usually logically be 3rd not 2nd.
There are no comments posted here yet
Load More
Please leave your comments in English
Posting as Guest
×
Rate this post:
0   Characters
Suggested Locations